Short Summary 
			   of the
		Modules Test Working Group
	 	     Cern July 12, 2000
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
		        Agenda

Introduction				Marco Meschini		20'

Module burn in test						
(Brussels + Antwerpen)			Wim Beaumont		20'

Status report on Lyon
PC based test system			Laurent Mirabito 	20'

State of thinking about the burn-in 
station and procedures	(Strasbourg)	JM Helleboid		10'

11:00 - Discussion on draft document: tests needed, procedures.
12:00 - The Lyon system on the bench: a guided tour by Laurent Mirabito
(at the the tracking lab)

Continue discussion on draft document: setup, work sharing.
A.O.B.
In addition to the above points: 
A. Cattai presented a flow chart concerning quality assurance
issues (global aspects, not only module test);
U. Goerlach, connected through VRVS, illustrated his FE-Hybrid 
qualification strategy. (unfortunately the quality of audio connection
was really bad. Goerlach will add some written comments to his 
transparencies.)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

After some discussion on what was presented,
and on the draft prepared by Marco on Module Testing, we agreed to 
go further and write in more detail the specifications that 
hybrids and module must satisfy and the tests we want to perform
to qualify them. We should indicate also when and where
the tests have to be done and possibly repeated.

We are aware that there is a huge amount of work to be done and this 
will require contribution by many people.

We have to proceed writing a second version of the draft
"Qualification Procedures for the CMS  Silicon Microstrip Modules",
following the guidelines emerged during the meeting.
We decided to share the work according to the following list
of items and responsible persons:

Hybrid testing: U. Goerlach + A. Honma 
                (they were not present, but they were indicated by many of us
		 as already deeply involved and possibly helpful)

Module testing before and after bonding: L. De Maria

Module burn in: P. Van Laer

System testing: A. Marchioro + R. Malina + D. Abbaneo

Definition of hardware setup for tests: W. Beaumont 

Definition of standard software tools to make results directly 
comparable and data logging to the detector database: 
L. Mirabito + S. Perries + R. Malina

Quality assurance control: A. Cattai

People are encouraged to get in contact with the responsible persons and 
give their (written) contribution.
The responsible persons of each subgroup are in charge of writing 
the corresponding section of the document
WITHIN JULY 20 (one week from now!)
and sending it to me at meschini@fi.infn.it

To simplify the editing and to reduce the size of mails, I propose 
to use Latex2e template for CMS notes from
http://cmsdoc.cern.ch/documents/docformat/info.html#templates
and send around only the .tex files.

NEXT MODULE TEST WORKING GROUP MEETING 6 SEPTEMBER 2000, 9:30-17:30
room 40-S2-a01

Regards
marco